SYNTHOMER REVACRYL R344 improve dirt pick up. Styrene acrylic Medium hardness, good tensile strength & elongation at break. Good water resistance. APEO & formaldehyde free.

SETATHANE D 1156 is used as a reactive diluent in combination with e.g SETATHANE D 1145, SETATHANE D 1150 and SETATHANE D 1160 in the formulation of 2-pack PU formulations and coatings to modify physical and mechanical properties.Generally speaking, SETATHANE D 1156 has good compatibility with the solvents listed. However,the solutions formed have to be tested for their storage stability.SETATHANE D 1156 can be thinned with esters, ketones,ether esters and aromatic hydrocarbons.Prolonged storage of a solution with low binder content may result in turbidity and sedimentation. Only PUR grade solvents should be used (< 0.05 % water).The solvent should not contain reactive groups.Because of its low viscosity, SETATHANE D 1156 is especially suitable in combination with SETATHANE D 1145,D 1150 and D 1160 in the formulation of solvent-free,self-leveling polyurethane coatings of low viscosity.

DEGALAN VP PM 788 is a versatile binder. It is useable for the manufacture of glossy and concrete coatings, metal coatings, marine and container coatings, aerosol paints and plastic coatings. DEGALAN® VP PM 788 is soluble in esters, ketones, glycol ethers, glycol esters and aromatics.

BECKOCOAT PU 428/51XMPAC is a rapid curing. Radiant brilliance. Superior abrasion resistance. Outstanding impact resistance, excellent adhesion. Floor sealers, wood coating, concrete impregnation. Crosslinker for alkyd resins in two-component systems.The extreme abrasion resistance, impact resistance, and chemical resistance make Beckocoat PU 428 films cured with the action of air humidity an excellent sealer and impregnation medium for concrete, a binder for non-slip coatings, for concrete coatings resistant to fuel oil and abrasion, for instance in garages, or for floorings and coatings for walls and ceilings in laboratories, chemical factories, etc. The films cure to radiant brilliance and can also be recommended for wooden floors subject to heavy wear like in bowling alleys, roller skating rinks, dancing halls, gymnasiums and schools. Beckocoat PU 428 has also proved an ideal vehicle for coating sports articles like spears, bowling pins, golf balls, bats, hockey sticks, tennis rackets, etc. In exterior use, Beckocoat PU 428 will lose gloss and will yellow. Weather resistance and gloss retention can be enhanced through coemploying alkyd resins like VIALKYD AR 408.