BECKOCOAT PU 428/51XMPAC is a rapid curing. Radiant brilliance. Superior abrasion resistance. Outstanding impact resistance, excellent adhesion. Floor sealers, wood coating, concrete impregnation. Crosslinker for alkyd resins in two-component systems.The extreme abrasion resistance, impact resistance, and chemical resistance make Beckocoat PU 428 films cured with the action of air humidity an excellent sealer and impregnation medium for concrete, a binder for non-slip coatings, for concrete coatings resistant to fuel oil and abrasion, for instance in garages, or for floorings and coatings for walls and ceilings in laboratories, chemical factories, etc. The films cure to radiant brilliance and can also be recommended for wooden floors subject to heavy wear like in bowling alleys, roller skating rinks, dancing halls, gymnasiums and schools. Beckocoat PU 428 has also proved an ideal vehicle for coating sports articles like spears, bowling pins, golf balls, bats, hockey sticks, tennis rackets, etc. In exterior use, Beckocoat PU 428 will lose gloss and will yellow. Weather resistance and gloss retention can be enhanced through coemploying alkyd resins like VIALKYD AR 408.

SETATHANE D 1145 is applied in the formulation of hard and tough coatings and synthetic resin mortars.It is used in combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals. In combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals.

SETATHANE D E 2656 is applied in combination with Desmodur® VL as a binder for chemically resistant coatings. SETATHANE D E 2656 is suitable for the formulation of coatings and mortars with high chemical resistance for food and beverage industries. Coatings formulated with SETATHANE D E 2656 / Desmodur VL generally exhibit very good resistance to organic and inorganic acids, alkalis and solvents. Overcrosslinking of 500 % is usual. This optimizes chemical resistance and flow. To ensure blister-free curing, SETATHANE D E 2656 requires the addition of hydrated lime and/or cement as a CO2 scavenger.

SETATHANE D 1155 is applied in combination with e.g. SETATHANE D 1145 and 1150 in the formulation of coatings SETATHANE D 1155 is not recommended as a sole binder. Because of its low viscosity, SETATHANE D 1155 is especially suitable for combination with SETATHANE D 1145 and 1150 in the formulation of solventfree, self-leveling polyurethane coatings of low viscosity. Desmodur® VL or VL 50 are normally used as hardener.