NUBIX V-8 is a ultramarine violet, pigment classified as C.I. Pigment Violet 15. Its composition includes violet sodium polysulfide aluminosilicate of the sodalite type.

The FLV Series colorants have been formulated for use in all epoxy coatings as well as polyurethane and polyaspartic coatings for multiple substrates. The rheological profile of the FLV Series yields a product line with superior handling properties when compared to many other colorants based on 100% solids epoxy or polyol resins. The FLV Series pigment dispersions consist of organic and inorganic pigments milled in a proprietary system. The stabilization method was chosen to ensure broad compatibility in multiple resin chemistries as well as long-term viscosity and colorant stability. The primary stabilizer contains a high level of bio-based components making this line more sustainable than other colorant lines. Colorants based on epoxy resins will increase in viscosity over time. The FLV Series is viscosity stable for up to 2 years. There will be no solidification or gelling during storage and no crystallization will occur.

The FLV Series colorants have been formulated for use in all epoxy coatings as well as polyurethane and polyaspartic coatings for multiple substrates. The rheological profile of the FLV Series yields a product line with superior handling properties when compared to many other colorants based on 100% solids epoxy or polyol resins. The FLV Series pigment dispersions consist of organic and inorganic pigments milled in a proprietary system. The stabilization method was chosen to ensure broad compatibility in multiple resin chemistries as well as long-term viscosity and colorant stability. The primary stabilizer contains a high level of bio-based components making this line more sustainable than other colorant lines. Colorants based on epoxy resins will increase in viscosity over time. The FLV Series is viscosity stable for up to 2 years. There will be no solidification or gelling during storage and no crystallization will occur.

CHROMA-CHEM® ED-5013 The ED Series colorants have been formulated for use in epoxy coatings. These colorants are formulated to limit the negative impact on the final epoxy coating. Therefore, the rheology of these colorants tends to be more viscous and is suitable for in-plant tinting.The ED Series pigment dispersions for epoxy applications consist of organic and inorganic pigments milled in a bisphenol A epoxy resin. The dispersing resin used in each colorant formulation was chosen to ensure broad compatibility in most epoxy coatings. In only a couple of cases, additives were needed to stabilize these colorants. Therefore, the coatings formulator can develop a coatings system that will not be negatively impacted when tinted with the ED Series colorants.