SPI 8130 is a modified polyamide adduct epoxy curing agent. SPI 8130 provides performance equivalent to workhorse polyamide solutions, but offering lower VOC levels. Epoxy coatings cured with SPI 8130 require a short induction period and provide high gloss, hardness and impact resistance.

Arnox 6 is an Aldimine reactive diluent designed to be used in polyurea and polyaspartic type systems as a viscosity reducer and pot-life retarder. It may also be used in oxazolidine containing systems.

SPI 8089 is a modified cycloaliphatic amine that provides fast cure at low temperatures and excellent performance in wet and damp conditions. SPI 8089 is low in viscosity, and has excellent early blush resistance. It can be used as a sole curing system or as an accelerator for other amine curing agent systems. 8089 cured coatings provide good resistance to water, acid, and solvents and can also be used as an accelerator for other aliphatic and cycloaliphatic hardeners.

SPI 8125 is a moderate to high viscosity polyamide hardener, which imparts resiliency, and toughness to a cured epoxy formulation. Its imidazoline content provides improved compatibility with epoxy resins. One to one by volume mix ratios are possible with SPI 7128 standard liquid epoxy resin, and this makes this hardener a good choice for two part adhesive applications.