Polymere

RUVA-93 by Otsuka Chemical is 2-Propenoic acid 2-methyl-, 2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl]ethyl ester. It is a reactive ultraviolet stabilizer. It is used in plastic lenses, film, sheets, packaging material, containers, fiber, and as alternative plastic to glass. It is a reactive ultraviolet absorber that is able to copolymerize efficiently with a variety of vinyl monomers such as methacrylic, styrenic, and acrylonitrile monomers. Provides permanent placement of the benzotriazole in the polymer. Imparts high weatherability to thin films and fibers. Provides permanence of the stabilizer in the resin and improved compatibility even in very high loadings. RUVA-93 offers excellent environmental acceptability, expanded technology options, and the ability to design new UV polymer screens with unique properties.

AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.).

ULTRAMARINE BLUE EP-37 is a reddish Ultramarine Blue with excellent outdoor durability, light and heat fastness. Non bleeding, non migratory. P is the basic series for general applications, including Plastics.

Q-Cel® Lightweight series products have a density approximately one-fifth of most thermoset resins. On an equal weight basis, the Q-Cel® hollow spheres occupy about five times more volume than an equivalent weight of resin, which can reduce compound weight and cost. They can replace heavy fillers, such as calcium carbonate, talc and clays, thus lowering the weight of composite materials. Spheres have the lowest surface area of any filler type, thus the lowest resin demand. Lower viscosities are common, allowing less resin to be used, usually resulting in cost savings in many applications. Q-Cel® 6014® is recommended for castings applications with polyesters, urethanes, PVC plastisol, and other systems where low viscosity and low shear processing conditions are used.