Peintures et revêtements

EASTMAN™ CHLORINATED POLYOLEFIN 343-3 (50% SOLIDS IN XYLENE) is a 50% solution of a chlorinated polyolefin in xylene. It is 26-32 wt. % chlorine and has a Gardner color value of 11. CHLORINATED POLYOLEFIN 343-3 has a good solvent tolerance for a wide range of solvents.

EASTMAN™ CHLORINATED POLYOLEFIN 343-1 (100% SOLIDS) is supplied as a white powder and is soluble in both toluene and xylene. It is 18-23 wt. % chlorine. CP 343-1 has good resistance to high temperatures. Because of its limited solubility, solutions of CP 343-1 may become hazy, partially precipitate from solution or gel with exposure to low temperatures. Should any of the above conditions occur, warming the contents to approximately 38° 49° C, with mild agitation will generally return the product to its original condition. Care should be taken in handling or mixing nonpolar solvents such as xylene and toluene.

EASTMAN™ EP SOLVENT is a colorless, water-miscible solvent providing a slow evaporation rate, good viscosity control in waterborne resins, and high flash point. Eastman™ EP Solvent has a milder, less detectable odor than most other glycol ethers, enhancing its use in coatings when mild odor is desirable. Eastman™ EP Solvent is completely water miscible over a wide range of temperatures. It can also be used to develop customized aqueous cleaners.

EASTOFLEX™ E1060PL AMORPHOUS POLYOLEFIN are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color.