Aditya Birla Dalton Products – Expanding Performance & Sustainability

CHEMRES 226 HFM is the modified version with lower-viscosity compared to standard ChemRes-226. ChemRes-226 polyol resin is an aqueous, OH-reactive emulsion that can be used as a component of a three-part, resin-based, cementitious-polyurethane flooring system. When formulated, ChemRes 226 polyol resin produces high performance properties in coatings, slurries, and trowel mortar systems. As a concrete coating, ChemRes TM 226 polyol resin exhibits good durability through high compressive and bond strength.

ChemCure® 116 reactive diluent is a monofunctional, aliphatic, 2-ethylhexanol diglycidyl ether. At lower blend percentages in standard liquid epoxy resin, ChemMod® 116 product works well to cut viscosity and extend potlife while maintaining hardness development.

ChemMod® 8 reactive diluent is a monofunctional, C12-C14 aliphatic glycidyl ether. At lower blend percentages in standard liquid epoxy resin, ChemMod® 8 product works well to cut viscosity and extend potlife while maintaining hardness development.

ChemMod® 32 reactive diluent is a difunctional, aliphatic, polypropylene glycol diglycidyl ether. In standard liquid epoxy resin, ChemMod® 32 product extends potlife while maintaining hardness development up to higher blend percentages required to cut viscosity.

ChemMod® 36 reactive diluent is a difunctional, aliphatic, dipropylene glycol diglycidyl ether. In standard liquid epoxy resin, ChemMod® 36 product maintains potlife and hardness development up to higher blend percentages required to cut viscosity

ChemMod® 48 reactive diluent is a trifunctional, aliphatic, Trimethylol propane triglycidyl ether. In standard liquid epoxy resin, ChemMod® 48 product maintains potlife and hardness development at higher blend percentages required to cut viscosity.

ChemMod® 61 reactive diluent is a monofunctional, aliphatic, butyl glycidyl ether. At lower blend percentages in standard liquid epoxy resin, ChemMod® 61 product works well to cut viscosity and extend potlife while maintaining hardness development.

ChemMod® 62 is mono-functional reactive diluent based on o-Cresol. The main use of ChemMod® 62 is for reducing viscosity of conventional epoxy resins. The blends so prepared can be reacted with all the common curing agents employed for curing epoxy resin.ChemMod® 62 is known for its excellent retention of mechanical and chemical resistance properties relative to other monoepoxide diluents, also it does not influence the reactivity of the blends as it happens in the case with aliphatic mono-functional reactive diluents.

ChemMod® 67 reactive diluent is a difunctional, aliphatic, 1,4-butanediol diglycidyl ether. In standard liquid epoxy resin, ChemMod® 67 product maintains potlife and hardness development at higher blend percentages required to cut viscosity.

ChemMod® 68 reactive diluent is a difunctional, aliphatic, neopentylglycol diglycidyl ether. In standard liquid epoxy resin, ChemMod® 68 product maintains potlife and hardness development up to higher blend percentages required to cut viscosity.

ChemMod® 107 reactive diluent is a difunctional, aliphatic, cyclohexanedimethanol diglycidyl ether. In standard liquid epoxy resin, ChemMod® 107 product maintains potlife and hardness development at higher blend percentages required to cut viscosity.

ChemRes™ 612 RSN is an acrylate modified liquid epoxy resin.

ChemRes™ 618 RSN is ChemRes™ 628 liquid epoxy resin modified with ChemMod® 8 reactive diluent. This resin offers lower viscosity & lower surface tension. Both these properties are advantageous while formulating. The low viscosity improves the cost effectiveness by increasing filler loading & the low surface tension improves adhesion by better substrate wetting, it also helps in better pigment wetting and thereby improve the pigment dispersion and stability.

ChemRes™ 635 is a formulated epoxy resin blend that will create superior defect-free coatings with better flow and leveling properties. Excellent system when combined with ChemCure® 319 and has high chemial resistance.

ChemRes™ 640 RSN is general-purpose unmodified low viscosity diglycidyl ether of Bisphenol-F. In addition to offering advantage in terms low viscosity, ChemRes™ 640 RSN provides better chemical resistance when compared to standard Bisphenol-A based liquid epoxy resins in particular towards certain acids.

ChemRes™ 664 RSN is a special liquid epoxy resin designed for use in flexible resin applications.

ChemRes™ 800 RSN is designed to be used only with ChemCure® 400.

Altor® 201 polyaspartic ester is a fast reacting, low-color, solvent-free, amine-functional co-reactant for polyisocyanates. Altor® 201 polyaspartic ester was developed for high-solids, two-component polyurethane and urea coatings. The Altor® products can be applied direct to metal as one-coat solutions in environments with low to moderate protection needs. For extreme environments, the polyaspartic coating can act as the intermediate and topcoat in one layer, increasing productivity and reducing operation costs. Altor® 200 or Altor® 202 products can be blended with Altor® 201 polyaspartic ester to obtain customized work and dry time characteristics when formulating high-solids polyurea topcoats. For polyaspartic products, humidity and substrate moisture control is crucial as water accelerates curing.

Altor® 202 polyaspartic ester is a slow reacting, low-color, solvent-free, amine-functional co-reactant for polyisocyanates. Altor® 202 polyaspartic ester was developed for high-solids, two-component polyurethane and urea coatings. The Altor® products can be applied direct to metal as one-coat solutions in environments with low to moderate protection needs. For extreme environments, the polyaspartic coating can act as the intermediate and topcoat in one layer, increasing productivity and reducing operation costs. Altor® 202 polyaspartic ester is generally used as a curing retardant, blended with either Altor® 200 or Altor® 201 products to obtain customized work and dry time characteristics. For polyaspartic products, humidity and substrate moisture control is crucial as water accelerates curing.

Altor® 205LV polyaspartic ester is a low viscosity, low color, amine-functional co-reactant for polyisocyanates, designed as a ready-to-use, solvent-free system, delivering optimal work and dry time characteristics, and excellent film appearance. The high-solids, UV and chemical resistance, and other properties of polyurea systems are maintained without the requirement of solvents. The Altor® products can be applied direct to metal as one-coat solutions in environments with low to moderate protection needs. For extreme environments, the polyaspartic coating can act as the intermediate and topcoat in one layer, increasing productivity and reducing operation costs. Altor® 205LV polyaspartic ester can be blended with Altor® 202 product for further customization. For polyaspartic products, humidity and substrate moisture control is crucial as water accelerates curing.

Acme Shield® Plus Admixture a liquid combination water-repellent and plasticizer used in the production of CMUs, SRWs and pavers. Improves color distribution, reduces color bleeding and exhibits less fading; improves green strength and surface texture; reduces cycle times.

Acme Shield® STO Admixture a liquid combination water-repellent and plasticizer used in the production of CMUs, SRWs and pavers. Increases cement performance; improves color distribution, reduces color bleeding and exhibits less fading; improves green strength and surface texture; reduces cycle times.