Protect Your Formulations with Vink Chemicals Preservatives

VINKOCIDE™ CMIO is a formulation of CMIT/MIT and OIT ideal for use in aqueous and water miscible systems. broad antimicrobial spectrum against bacteria, fungi and yeasts.

parmetol® K 11 is a copper stabilized combination of isothiazolones. Suitable for preservation of a broad range of water based products.

parmetol® DF 35 N is stabilised aqueous preparation based on chloromethyl-/ methylisothiazolone (CMI/ MI) and reaction product of ethylene glycol, urea and Paraform.

VINKOCIDE™ CMI 1.5 is a formulation of CIT/MIT ideal for use in aqueous and water miscible systems, broad antimicrobial spectrum against bacteria, fungi and yeasts.

VINKOCIDE™ BIT 20 G is a product based on the active BIT, ideal for use in aqueous and water miscible systems.

VINKOCIDE™ X10 S is an excellent fungicide and algaecide with a cost-efficient efficacy. It is also efficient against some bacteria. It has an excellent temperature stability.

parmetol® DF 19 forte is especially suitable for protection against algal and fungal attack for surface and façade coatings as well as for other building chemical products. It is free of VOC and organic solvents.

VINKOCIDE™ KTL is based on 1,2-Benzisothiazolin-3-one (BIT) with Methylisothiazolinone (MIT). ideal for use in aqueous and water miscible systems. Broad antimicrobial spectrum against bacteria, fungi and yeasts. Free from formaldehyde, formaldehyde releasers. Excellent chemical stability phenolics or heavy metals, non-volatile, excellent long-term efficacy, good compatibility with other raw materials.

parmetol® CF 8 Film preservative with enhanced long term protection without Carbendazim.

parmetol® K 20 is nearly colourless- light green liquid. Fully soluble in water and in most polar organic solvents.

parmetol® MBX is highly-effective in-can preservative without formaldehyde and AOX. Immediately acting preservative with long-term protection Fast germ count reduction e.g. for contaminated process water, Production hygiene integrated in-can preservative Synergistic working combination of benzisothiazolone (BIT), methylisothiazolon (MIT) and bis(3-aminopropyl)dodecylamine (BDA). Approved for Ecolabel, e.g. "European Flower" or "Nordic Ecolabel".

s&m Bronopol is fully effective both in anionic as well as cationic and non-ionic systems. High pH values (> pH 8.0) should be avoided. Acidic pH values have no negative influence on the effectiveness. Preservative for household products.

grotan® TK 5 Plus N is a preservative for concrete admixtures. Liquid preparation based on 2-Octyl-2H-isothiazol-3-one and reaction product of ethylene glycol, urea and Paraform. Highly effective in ligninsulfonate based admixtures. Broad, balanced spectrum of effect against yeasts and moulds. Contains no organically bound chlorine (has no effect on the AOX value).

Vinkocide DBNPA 20 is a solvent-based formulation of 2,2-dibromo-3-nitrilopropionamide.

VINKOCIDE™ CDO is a formulation of Carbendazim, OIT and 3-(3,4-dichlorophenyl)-1,1-dimethylurea. It is used for the preservation of dry paint films and coatings for outdoor applications. It is especially suitable for the protection against algal and fungal attack for surface and façade coatings as well as for other building chemical products. It has an excellent stability and long-term efficacy, free from heavy metals, organic solvents and VOC and is compatible with nearly all raw materials for water-based products.

VINKOCIDE™ BIT 10 is an aqueous, alkaline solution with 10 % BIT for the preservation of a wide variety of aqueous products. Suitable for a pH of 3-13 and with good stability at high temperatures.

VINKOCIDE™ BIT 20 D is an aqueous dispersion with 20 % BIT with a low pH for the preservation of a wide variety of aqueous products. Suitable for a pH of 3-13 and with good stability at high temperatures.

grotan® WS Plus is suitable for use in water-mixed metalworking fluids, metalworking fluid concentrates and other technical emulsions.

grotamar® 71 is a preservative for diesel fuels. Fuel biocide against bacteria, yeasts and moulds (incu. sulphate - reducing bacteria). It is good anti corrosive properties and enhances lasting protection against microbial degradation. in complaince with BPR and FIFRA. Good solubilty in diesel fuel and water. Free of sulphur.

grotan® BA 21 is a preservative for technical products. Free of chloromethylisothiazolone, formaldehyde, formaldehyde depots and other aldehydes.

grotan® TK 5 plus is a preservative for concrete additives.