Have you tried HALOX’s Cutting-Edge Corrosion Inhibitor Technology?

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate). HALOX® Z-PLEX® 250 is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-10% based on total formula weight.

HALOX® Z-PLEX® 111 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® Z-PLEX® 111 is highly versatile and more economical to use than commercial zinc phosphate.

HALOX 700 is a white, non-refractive, corrosion inhibiting pigment used in protective coatings. The combination of zinc and aluminum phosphates provides extended protection in solvent-based and water-based epoxy and urethane coatings. For alkyd and acrylic coatings, HALOX Organic Corrosion Inhibitors are recommended for use in combination with HALOX 700.

HALOX® SZP-391 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SZP-391 is the most efficient and versatile corrosion inhibitive pigment. HALOX® SZP-391 is recommended for use in a wide variety of resin systems. HALOX® SZP-391 is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, and high acid value resins, catalyzed baking systems, and vinylidene chloride latexes.

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in water-borne and solvent-borne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HALOX CW-314 is a non-toxic, heavy metal free anti-corrosive pigment designed for use in water-borne and solvent-borne protective coating systems. It is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards are required.

HALOX® SW-111 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water reducible resin systems and corrosion resistant caulks and sealants.

HALOX® 550 is an inorganic-organic hybrid corrosion inhibitor to protect water-based and solvent-based coatings. HALOX® 550 is offering multiple advantages as listed. Thin-film applications (<10 µm), easy to disperse, post-addable, reduces white rust on galvanized, reduces black rust on Galvalume™, increases hydrophobicity, improves anti-fingerprint, no effect on gloss, compatible with water and solvent-based coatings, reduces silver, aluminium oxidation, high temp stable, non-flammable, pH stable, low freeze point. HALOX® 550 is suitable for the applications of clear coats, direct-to-metal, latex primers, coatings, acrylic emulsions, water-dispersible alkyds, and alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings.  

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. HALOX® 650 is specifically designed for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 is suitable for the application of coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.