Deuteron LE 829 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the production of soles with antistatic character as required by EN 344 or for special shoes for use in computing and medical areas.

Deuteron LE 829 is of high polarity and thus noticeably reduces the electrical resistance of polyurethane-foams, even when used in small quantities.

Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems.

Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.

Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings.

Deuteron ND 210 is a wetting agent with a cationic effect. It reduces the surface tension of organic solvents or binding agent solutions and thus supports the dispersion process, making it more cost-effective.

Deuteron ND 210 also allows a more economical use of pigments since both the hiding and the coloring powers largely depend on the dispersion conditions. The much-dreaded flooding and floating of pigments can be prevented with Deuteron ND 210.

Deuteron ND 210 is suitable for the production of pigmented coating materials based on oxidative and on physically drying binding agents. The wetting-promoting properties of Deuteron ND 210 are particularly advantageous for the production of highly filled systems, such as pigment paste. Likewise, the agent is also suitable for coating systems for which both of the above aspects are desirable.