Because of its cationic character and the extremely high polarity of Deuteron LE 100 LV, the electrical resistance is reduced considerably – even when using small quantities.

Deuteron LE 100 LV is delivered with an active content of 100 %. The product is free of solvent and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems.

Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe-soles), UV- or electron-beam curing screen inks to avoid electrostatic charge.

Deuteron LE 151 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the shoe industry to produce soles with antistatic properties. Deuteron LE 151 is preferred in systems which already contain MEG as a cross-linking component.

Deuteron LE 151 is of high polarity and therefore reduces the electrical resistance of polyurethane-foams considerably – even when using small quantities.

Because of its cationic character and the extreme polarity of Deuteron LE 80, the electric resistance of organic solvents and their mixtures is considerably reduced – even when using small quantities.

Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy.

Deuteron LE 80 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes.

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.

The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.

Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available.