Q-Cel® Lightweight series products have a density approximately one-fifth of most thermoset resins. On an equal weight basis, the Q-Cel® hollow spheres occupy about five times more volume than an equivalent weight of resin, which can reduce compound weight and cost. They can replace heavy fillers, such as calcium carbonate, talc and clays, thus lowering the weight of composite materials. Spheres have the lowest surface area of any filler type, thus the lowest resin demand. Lower viscosities are common, allowing less resin to be used, usually resulting in cost savings in many applications. Q-Cel® 6014® is recommended for castings applications with polyesters, urethanes, PVC plastisol, and other systems where low viscosity and low shear processing conditions are used.

Birla Carbon Raven FC1 carbon black is a high performance black for U.S. FDA indirect food contact plastics applications. This product provides the color, processing, and surface finish properties needed across the diverse polymers typically used for food-contact applications.

BYK-1795 is Silicone-free polymer defoamer for solvent-borne, solvent-free and radiation-curable systems.

Luna-vin SP is a medium molecular weight suspension resin, which provides clarity and toughness to rigid films, or solution coatings. Luna-vin SP also provides durability and chemical and stain resistance. Luna-vin SP can be used in adhesives, heat-sealable packaging, marine and protective coatings, magnetic cards and printing inks.