HALOX® FLASH-X® 330 is an effective, nitrite-free, liquid additive used in the manufacture of waterborne protective coatings for inhibition of flash rust and in-can rusting and has demonstrated excellent flash rust inhibitive performance on a variety of metal substrates without the use of nitrites.

HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne and solvent-borne coatings systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems and may also be used as a metal pretreatment additive. Recommended concentrations range from 0.5-1.5% based on total formulation solids. The amount of HALOX® 520 required for optimum performance should be determined in trials over the recommended concentration range.

HALOX® CZ-170 is a white, nonrefractive, corrosion and tannin stain inhibiting pigment used in protective coating systems. HALOX® CZ-170 is an effective replacement for zinc oxide. HALOX® CZ-170 can also be used in high gloss (+75 gloss units at 60°) and thin film. Application: Recommended loading levels range from 2-5% by total formula weight in multi-substrate waterborne systems. Typical loading ranges are between 0.5-2% by total formula weight in high gloss and thin film systems, for both water and solventborne coatings.

HALOX® BW-191 are white, nonrefractive, corrosion inhibiting pigments used in protective coating systems. HALOX® BW-191 is recommended for use in most waterborne systems such as latexes and water reducibles. Because of its lower oil absorption, it can also be effective in anticorrosive high solids coatings. HALOX® BW-191 recommended loading levels range from 5-10% based on total formula weight.