HALOX® 630 is a liquid organic corrosion inhibitor for solvent based protective coatings on metal surfaces. HALOX® 630 may use in solvent-borne clear or pigmented coatings.

HALOX® 550 WF is a water-free (WF) sol-gel-based corrosion inhibitor/adhesion promoter for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. Suitable for low pH and acid-catalyzed systems.

HALOX® SZP-391 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SZP-391 is the most efficient and versatile corrosion inhibitive pigment. HALOX® SZP-391 is recommended for use in a wide variety of resin systems. HALOX® SZP-391 is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, and high acid value resins, catalyzed baking systems, and vinylidene chloride latexes.

HALOX® RC-980 is an organic additive designed to convert red rust to a black iron oxide. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does not contain tannic acid, oxime chelates, phosphates or phosphoric acid.