ORGASOL® 2002 ES6 NAT 3 is a spheroïdal powder of polyamide 12, with 60 µm as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance. ORGASOL® 2002 ES6 NAT 3 is used as a multifunctional additive in coatings. It improves the scratch and the abrasion resistance while providing a regular textured finish thanks to the spheroïdal shape of the particles. Playing on coatings texture, ORGASOL® 2002 ES6 NAT 3 can lead to anti-slippery properties associated to a better clean ability. The high chemical resistance of polyamide 12 and the particle size distribution are among the key parameters that make ORGASOL® 2002 ES6 NAT 3 compatible with most resins and common formulating additives used in coating industry. It can be added to interior or exterior paints and easily dispersed in solvent or water based or 100% solid UV curable system.

HALOX® SZP-395 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SZP-395 is our most efficient and versatile corrosion inhibitive pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as: alkyds (both traditional and high solids), epoxies, latexes, water reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 makes it the pigment of choice in thin film applications. Application: Recommended loading levels range from 2-5% based on total formula weight in many waterborne systems. and recommended loading levels range from 3-7% based on total formula weight in traditional solventborne coatings.

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate). HALOX® Z-PLEX® 250 is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-10% based on total formula weight.

HALOX® ZINC PHOSPHATE is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. It is generically identified as zinc phosphate-dihydrate. HALOX® ZINC PHOSPHATE exhibits a narrow particle size distribution: upper particle size limit of 10 microns, mean particle size 5 microns. This pigment has a high degree of versatility. It is a standard corrosion inhibitor for most high-performance resin systems such as types of vinyl, chlorinated rubbers, and epoxies. It is recommended for high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. HALOX® ZINC PHOSPHATE is also recommended for thin film applications (1 mil or 25 microns). HALOX® ZINC PHOSPHATE is compliant to ASTM D 6280-98 Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-15% based on total formula weight.