Acme Shield® STO Admixture a liquid combination water-repellent and plasticizer used in the production of CMUs, SRWs and pavers. Increases cement performance; improves color distribution, reduces color bleeding and exhibits less fading; improves green strength and surface texture; reduces cycle times.

Acme Shield® Plus Admixture a liquid combination water-repellent and plasticizer used in the production of CMUs, SRWs and pavers. Improves color distribution, reduces color bleeding and exhibits less fading; improves green strength and surface texture; reduces cycle times.

Acme Hardscape Plus® Admixture is an integral, polymeric, liquid admixture designed for use in the manufacture of SRWs, pavers and block for strength enhancement. Can be used for efflorescence control, water repellent or plasticizer. Improves color distribution, reduces color bleeding and exhibits less fading; better cement dispersion resulting in higher strengths.

Q-Cel® Lightweight series products have a density approximately one-fifth of most thermoset resins. On an equal weight basis, the Q-Cel® hollow spheres occupy about five times more volume than an equivalent weight of resin, which can reduce compound weight and cost. They can replace heavy fillers, such as calcium carbonate, talc and clays, thus lowering the weight of composite materials. Spheres have the lowest surface area of any filler type, thus the lowest resin demand. Lower viscosities are common, allowing less resin to be used, usually resulting in cost savings in many applications. Q-Cel® 6014® is recommended for castings applications with polyesters, urethanes, PVC plastisol, and other systems where low viscosity and low shear processing conditions are used.