Paints & Coatings

Epotec RD 110 is the mono-glycidyl ether of 2-ethyl hexanol. The primary use of epotec RD 110 is as a reactive diluent for high viscosity epoxy resins. Epotec RD 110 is compatible in all concentrations and those resin blends can be cured with variety of curing agents.

EPOTEC RD 114 is a diglycidyl ether of Neopentyl glycol. It is primarily used as a reactive diluent for high viscosity epoxy resins. RD 114 is compatible at all concentration with all classes of epoxy resins. Performance properties of system containing RD 114 are maintained at higher level than is possible with monofunctional reactive diluents. It also improves filler loading and fiber wetting characteristics.

Recyclamine® R802 is an amine curing agent which enables recyclable thermosetting epoxy. It possesses low viscosity, cures at ambient temperature and exhibits moderate reactivity with di-epoxide resins. Unlike conventional thermoplastics, cross-linked thermosetting matrix from Recyclamine® R802 undergoes cleavage by low energy solvolysis at specific conditions, resulting in recovering of the epoxy matrix as thermoplastic resin. In fiber reinforced composites, Recyclamine® R802 enables recycling & recovery of reinforcement and epoxy matrix as thermoplastic resin. The recovered materials can be re-used to close the loop.

Epotec TH 7320 is a low viscosity modified cycloaliphatic polyamine curing agent for use with liquid epoxy resins such as Epotec YD 128 to produce solvent free room temperature curable thermoset coatings, floor toppings. When formulated appropriately with epoxy resin it gives clear, air free, glossy surfaces. It also provides resistance to variety of chemicals such as acids, alkalies, hydrocarbons and water. Epotec TH 7320, being cycloaliphatic, also provides excellent weather resistance. It is less irritating, gives low odour, excellent transparency and light colour.