American Coatings Show 2026 - Floor Coatings

CHEMRES 226 HFM is the modified version with lower-viscosity compared to standard ChemRes-226. ChemRes-226 polyol resin is an aqueous, OH-reactive emulsion that can be used as a component of a three-part, resin-based, cementitious-polyurethane flooring system. When formulated, ChemRes 226 polyol resin produces high performance properties in coatings, slurries, and trowel mortar systems. As a concrete coating, ChemRes TM 226 polyol resin exhibits good durability through high compressive and bond strength.

ChemCure® 273 is a modified aliphatic amine curing agent often used in high quality aliphatic flooring applications.

ChemCure® 337 ycloaliphatic curing agent for epoxy coatings creates films with high gloss, low color curative for chemical resistant floors.

Epotec TH 7320 is a low viscosity modified cycloaliphatic polyamine curing agent for use with liquid epoxy resins such as Epotec YD 128 to produce solvent free room temperature curable thermoset coatings, floor toppings. When formulated appropriately with epoxy resin it gives clear, air free, glossy surfaces. It also provides resistance to variety of chemicals such as acids, alkalies, hydrocarbons and water. Epotec TH 7320, being cycloaliphatic, also provides excellent weather resistance. It is less irritating, gives low odour, excellent transparency and light colour.

MINEX® ST A100 (particle size 4) is a surface-treated nepheline syenite (NS) that is easily dispersed in a wide range of reactive resin systems. It is designed to provide superior performance in waterborne, solvent-based, 100% solids, and powder epoxy coatings, as well as phenolic resins and polysulfide adhesives. It also provides good performance in 2K waterborne polyurethane, 1K self-crosslinking acrylics, and waterborne polyurethane dispersions. Ideal end-use coatings applications for MINEX® ST A100 (particle size 4) include specialty and high-end reactive architectural, protective, general industrial, floor, powder, wood, and aerospace coatings.

MINEX® ST is available in three particle sizes—4, 7, and 10—and two functional treatments: A100 and OV100. It offers similar optics, handling, gloss, and color acceptance as the equivalent MINEX grades, while delivering improved dispersion and higher loading capacity in select systems—enabling cost savings and reduced VOC content.

MINEX® ST micronized functional fillers and extenders are proven performance enhancers across a broad range of paints, coatings, adhesives, sealants, and inks. Select surface treatments were developed to further enhance chemical and stain resistance, washability, adhesion, weatherability, optical clarity, color retention in tinted systems, abrasion resistance, and tensile strength—by compatibilizing the mineral surface with the host binder systems and reactive chemistries.

MINEX and MINEX ST functional fillers are produced from nepheline syenite—a naturally occurring, silica-deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than 0.1% crystalline silica, with no detectable free crystalline silica in the mineral complex. All MINEX ST grades are processed and sized in strict adherence to Covia’s QIPSM quality assurance programs, ensuring consistently uniform chemistries, tight particle size distributions, and controlled top sizes for reliable performance.

MINEX® ST A100 (particle size 7) is a surface-treated nepheline syenite (NS) that is easily dispersed in a wide range of reactive resin systems. It is designed to provide superior performance in waterborne, solvent-based, 100% solids, and powder epoxy coatings, as well as phenolic resins and polysulfide adhesives. It also provides good performance in 2K waterborne polyurethane, 1K self-crosslinking acrylics, and waterborne polyurethane dispersions. Ideal end-use coatings applications for MINEX® ST A100 (particle size 7) include specialty and high-end reactive architectural, protective, general industrial, floor, powder, wood, and aerospace coatings.

MINEX® ST is available in three particle sizes—4, 7, and 10—and two functional treatments: A100 and OV100. It offers similar optics, handling, gloss, and color acceptance as the equivalent MINEX grades, while delivering improved dispersion and higher loading capacity in select systems—enabling cost savings and reduced VOC content.

MINEX® ST micronized functional fillers and extenders are proven performance enhancers across a broad range of paints, coatings, adhesives, sealants, and inks. Select surface treatments were developed to further enhance chemical and stain resistance, washability, adhesion, weatherability, optical clarity, color retention in tinted systems, abrasion resistance, and tensile strength—by compatibilizing the mineral surface with the host binder systems and reactive chemistries.

MINEX and MINEX ST functional fillers are produced from nepheline syenite—a naturally occurring, silica-deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than 0.1% crystalline silica, with no detectable free crystalline silica in the mineral complex. All MINEX ST grades are processed and sized in strict adherence to Covia’s QIPSM quality assurance programs, ensuring consistently uniform chemistries, tight particle size distributions, and controlled top sizes for reliable performance.

MINEX® ST A100 (particle size 10)  is a surface-treated nepheline syenite (NS) that is easily dispersed in a wide range of reactive resin systems. It is designed to provide superior performance in waterborne, solvent-based, 100% solids, and powder epoxy coatings, as well as phenolic resins and polysulfide adhesives. It also provides good performance in 2K waterborne polyurethane, 1K self-crosslinking acrylics, and waterborne polyurethane dispersions. Ideal end-use coatings applications for MINEX® ST A100 (particle size 10) include specialty and high-end reactive architectural, protective, general industrial, floor, powder, wood, and aerospace coatings.

MINEX® ST is available in three particle sizes—4, 7, and 10—and two functional treatments: A100 and OV100. It offers similar optics, handling, gloss, and color acceptance as the equivalent MINEX grades, while delivering improved dispersion and higher loading capacity in select systems—enabling cost savings and reduced VOC content.

MINEX® ST micronized functional fillers and extenders are proven performance enhancers across a broad range of paints, coatings, adhesives, sealants, and inks. Select surface treatments were developed to further enhance chemical and stain resistance, washability, adhesion, weatherability, optical clarity, color retention in tinted systems, abrasion resistance, and tensile strength—by compatibilizing the mineral surface with the host binder systems and reactive chemistries.

MINEX and MINEX ST functional fillers are produced from nepheline syenite—a naturally occurring, silica-deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than 0.1% crystalline silica, with no detectable free crystalline silica in the mineral complex. All MINEX ST grades are processed and sized in strict adherence to Covia’s QIPSM quality assurance programs, ensuring consistently uniform chemistries, tight particle size distributions, and controlled top sizes for reliable performance.

MINEX® ST OV100 (particle size 4) is a hydrophobic, surface-treated nepheline syenite (NS) designed for enhanced performance in coatings and adhesives. This grade is easily dispersed in a wide range of reactive solvent-borne and 100% solids resin systems. It is particularly effective in polyurea resin and coating systems where variable surface moisture can lead to film defects. MINEX ST OV100 is engineered to deliver superior performance in polyurethane, polyaspartic, polyester, and silicone resin systems. Ideal end-use applications include: Industrial maintenance, General industrial, Industrial floor, Powder coatings, Wood coatings, Specialty architectural, Aerospace, Automotive.

MINEX® ST is available in three particle sizes—4, 7, and 10—and two functional treatments: A100 and OV100. It offers similar optics, handling, gloss, and color acceptance as the equivalent MINEX grades, while delivering improved dispersion and higher loading capacity in select systems—enabling cost savings and reduced VOC content.

MINEX® ST micronized functional fillers and extenders are proven performance enhancers across a broad range of paints, coatings, adhesives, sealants, and inks. Select surface treatments were developed to further enhance chemical and stain resistance, washability, adhesion, weatherability, optical clarity, color retention in tinted systems, abrasion resistance, and tensile strength—by compatibilizing the mineral surface with the host binder systems and reactive chemistries.

MINEX and MINEX ST functional fillers are produced from nepheline syenite—a naturally occurring, silica-deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than 0.1% crystalline silica, with no detectable free crystalline silica in the mineral complex. All MINEX ST grades are processed and sized in strict adherence to Covia’s QIPSM quality assurance programs, ensuring consistently uniform chemistries, tight particle size distributions, and controlled top sizes for reliable performance.

MINEX® ST OV100 (particle size 7) is a hydrophobic, surface-treated nepheline syenite (NS) designed for enhanced performance in coatings and adhesives. This grade is easily dispersed in a wide range of reactive solvent-borne and 100% solids resin systems. It is particularly effective in polyurea resin and coating systems where variable surface moisture can lead to film defects. MINEX ST OV100 is engineered to deliver superior performance in polyurethane, polyaspartic, polyester, and silicone resin systems. Ideal end-use applications include: Industrial maintenance, General industrial, Industrial floor, Powder coatings, Wood coatings, Specialty architectural, Aerospace, Automotive.

MINEX® ST is available in three particle sizes—4, 7, and 10—and two functional treatments: A100 and OV100. It offers similar optics, handling, gloss, and color acceptance as the equivalent MINEX grades, while delivering improved dispersion and higher loading capacity in select systems—enabling cost savings and reduced VOC content.

MINEX® ST micronized functional fillers and extenders are proven performance enhancers across a broad range of paints, coatings, adhesives, sealants, and inks. Select surface treatments were developed to further enhance chemical and stain resistance, washability, adhesion, weatherability, optical clarity, color retention in tinted systems, abrasion resistance, and tensile strength—by compatibilizing the mineral surface with the host binder systems and reactive chemistries.

MINEX and MINEX ST functional fillers are produced from nepheline syenite—a naturally occurring, silica-deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than 0.1% crystalline silica, with no detectable free crystalline silica in the mineral complex. All MINEX ST grades are processed and sized in strict adherence to Covia’s QIPSM quality assurance programs, ensuring consistently uniform chemistries, tight particle size distributions, and controlled top sizes for reliable performance.

MINEX® ST OV100 (particle size 10) is a hydrophobic, surface-treated nepheline syenite (NS) designed for enhanced performance in coatings and adhesives. This grade is easily dispersed in a wide range of reactive solvent-borne and 100% solids resin systems. It is particularly effective in polyurea resin and coating systems where variable surface moisture can lead to film defects. MINEX ST OV100 is engineered to deliver superior performance in polyurethane, polyaspartic, polyester, and silicone resin systems. Ideal end-use applications include: Industrial maintenance, General industrial, Industrial floor, Powder coatings, Wood coatings, Specialty architectural, Aerospace, Automotive.

MINEX® ST is available in three particle sizes—4, 7, and 10—and two functional treatments: A100 and OV100. It offers similar optics, handling, gloss, and color acceptance as the equivalent MINEX grades, while delivering improved dispersion and higher loading capacity in select systems—enabling cost savings and reduced VOC content.

MINEX® ST micronized functional fillers and extenders are proven performance enhancers across a broad range of paints, coatings, adhesives, sealants, and inks. Select surface treatments were developed to further enhance chemical and stain resistance, washability, adhesion, weatherability, optical clarity, color retention in tinted systems, abrasion resistance, and tensile strength—by compatibilizing the mineral surface with the host binder systems and reactive chemistries.

MINEX and MINEX ST functional fillers are produced from nepheline syenite—a naturally occurring, silica-deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than 0.1% crystalline silica, with no detectable free crystalline silica in the mineral complex. All MINEX ST grades are processed and sized in strict adherence to Covia’s QIPSM quality assurance programs, ensuring consistently uniform chemistries, tight particle size distributions, and controlled top sizes for reliable performance.

Pliotec CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick up resistance, suitable for low VOC garage floor paints.

PLIOTEC SC245 is a self-crosslinking all-acrylic latex that provides excellent blush resistance and adhesion to various substrates, including concrete and tile. It forms a durable film with good resistance to hot tire pick-up, making it ideal for clear concrete sealers and floor coatings. PLIOTEC SC245 can be formulated into coatings with less than 50 g/L VOC, offering excellent early water resistance, UV stability, and exterior durability, and it is free from APE and formaldehyde.