LUNA-CURE M-CDEA는 고성능 주조 폴리우레탄 도포를 위한 뛰어난 체인 익스텐더입니다.

LUNA-CURE M-CDEA는 규칙적인 고압축 하중에서 낮은 열 축적, 최대 150°C(300°F)의 우수한 가수분해 저항, 낮은 마모로 우수한 기계적 특성을 제공하며 리본 플로우 기술로 쉽게 처리할 수 있습니다.

Luna-vin 9027-LSB-35G is a bisphenol-A vinyl ester resin with a maximum of 35% styrene by weight. It provides excellent physical properties for boat and pool manufacturers. Luna-vin 9027-LSB-35G is specially adapted to meet the requirements of spray-up and hand-lay-up applications. It also provides very good mechanical strength such as tensile and flexural, when incorporated with reinforcement such as glass fiber or carbon fiber. Luna-vin 9027-LSB-35G can be easily applied by hand-lay-up laminating, spray-up, pultrusion, resin transfer molding (RTM) or filament winding. Luna-vin 9027-LSB-35G is supplied in a gray colour, and its cure properties are customised according to each user’s specific requirements.

Applications:

• Waste water treatment systems
• Food storage tanks and pure water systems
• Marine and pool manufacturing industries
• Corrosion-resistant flooring (when incorporated with aggregates)

Luna-vin 9027-LSB-35C is a bisphenol-A vinyl ester resin with a maximum of 35% styrene by weight. It provides excellent physical properties for boat and pool manufacturers. Luna-vin 9027-LSB-35C is specially adapted to meet the requirements of spray-up and hand-lay-up applications. It also provides very good mechanical strength such as tensile and flexural, when incorporated with reinforcement such as glass fiber or carbon fiber. Luna-vin 9027-LSB-35C can be easily applied by hand-lay-up laminating, spray-up, pultrusion, resin transfer molding (RTM) or filament winding. Luna-vin 9027-LSB-35C is supplied in a clear form, and its cure properties are customised according to each user’s specific requirements.

Lunacure DDS provides excellent high temperature properties and chemical resistance. Amongst the amine curing agents it provides the best retention of strength after prolonged exposure to elevated temperatures. It is mixed with epoxy resins in the 20-30 phr range with cure temperatures ranging from 115-150°C. Because of its low reactivity, LUNACURE DDS is usually employed with an accelerator, such as Dihydrazide and BF3-amines complexes. These compositions are also stable at room temperature but cure when heated.

For these charachteristics LUNACURE DDS can be used for:
• One Component Adhesives
• Solid Epoxy Adhesives and Powder Coatings
• Prepregs and Film Adhesives
• Electronic Potting and Encapsulating Compounds