CeTePox 484 R is an aqueous dispersion of a solid Type 1 epoxy resin. The resin is dispersed using proprietary epoxy-functional non-ionic emulsifiers and is supplied at 53% solids in water and organic co-solvents. It is completely water reducible.

Epotec YD 017 is a solid, high molecular weight bisphenol-A based epoxy resin presented as clear, light yellow flakes. It is designed for single pack, baking type epoxy coatings used in packaging, including can and coil coatings, and industrial protective coatings. Its high hydroxyl content enables use in ambient curable 2K systems, providing coatings with good hardness and a high softening point, making it ideal for primers and linings.

Epotec YDH 184 is diglycidyl ester of hexahydrophthalic anhydride. Due to the cyclic ring of hexahydrophthalic anhydride this resin is expected to give good resistance to ultraviolet light and weathering which is a limitation when it comes to standard bisphenol-A based epoxy resins. This also opens doors for cycloaliphatic epoxy resin epotec YDH 184 for use in outdoor coating applications where it is expected to give better non-yellowing characteristics and chalking resistance. The choice of curing agent also plays an important role in getting better performing formulations.

Epotec TH 7515-X-70 is a high viscosity reactive polyamide supplied at 70% solids in Xylene. It is commonly used as a curing agent for solution grade epoxy resins such as Epotec YD 011-X-75 to produce room temperature curable solventbased coatings. Epotec TH 7515-X-70 is especially used in solvent based anticorrosion coatings and shows compatibility with wide range of solvents normally used in epoxy based coatings. The reactivity of the mix can be adjusted by blending with accelerator such as tertiary amine. The coatings based on Epotec TH 7515-X-70 show good toughness and adhesion properties. Because of these properties it finds use in various applications.